Air To Water heat pump (Split)

This series of split air to water heat pump is designed for common weather area,in which the temperature between -10 to 38 in the whole year.The unit can work in both heating and cooling mode.Classic design with water pump and buffer tank installed inside.Flexible range with R407c and R410a available according to the client's requirement. Standard unit composition: 1)Base frame and external panels made of galvanized powder coated steel. 2)Extremely compact structure,easy demountable for access. 3)High efficiency compressor,R410a and R407c refrigerant are available for option. 4)Reverse cycle valve. 5)Soft start control for single phase power supply models. 6)Water flow switch equiped for water flow protection. 7)Careful protection functions such as:high pressure,low pressure,overheating,overload antifreezing,phase order,discharge temp,etc. 8)Water pump inside(Wilo). 9)Stainless steel buffer tank included. 10)Intelligent controller and adjustment by quickmind microprocessor with possibility of remote control.(Carel controller for standard). 11)Water side equiped with Danfoss stainless steel plate exchanger. 12)Air exchanger(Fins-coil) with hydrophilic coating. 13)Automatic defrosting function included. 14)Thermostatic heating element for evaporator anti-frosting protection. 15)Thermostatic expansion valve. 16)General testing and operational test carried out for every unit before package in the factory. Optional: 1)Stainless steel case for option 2)LCD wire controller for option 3)Additional water storage tank